linux2.6.36.1(兼容linux2.6.35各子版本)移植到mini2440-v2.0.docVIP

linux-（兼容linux-2.6.35各子版本） 在mini2440上的移植 开发环境 主 ?机：ubuntu10.04 开发板：Mini2440--256MB Nand, Kernel: 编译器：arm-linux-gcc-4.3.2.tgz u-boot：u-boot-2010.03.tar.gz 准备内核源代码 下载地址：/pub/linux/kernel/v2.6/ 把内核文件下载到了home/user目录下，进行解压操作 　　#cd /home/user　　#tar -zxvf linux-.tar.gz 修改交叉编译环境 ARCH ?= arm CROSS_COMPILE ?= arm-linux- //这个是交叉编译工具 测试编译 #make mini2440_defconfig #make 约十分钟，通过 修改mach-mini2440.c arch/arm/mach-s3c2440/mach-mini2440.c (参考友善之臂的linux-版的mach-mini2440.c 修改) 添加NandFlash的分区信息 参考友善之臂的分区表。（247行） static struct mtd_partition mini2440_default_nand_part[] __initdata = { [0] = { .name = u-boot, .size = SZ_256K + SZ_128K, .offset = 0, }, [1] = { .name = u-boot-env, .size = SZ_128K, .offset = SZ_256K + SZ_128K, }, [2] = { .name = kernel, // 5 megabytes, for a kernel with no modules // or a uImage with a ramdisk attached .size = 0 .offset = SZ_512K, }, [3] = { .name = root, .offset = SZ_512K+ 0 .size = MTDPART_SIZ_FULL, }, [4] = { .name = nand, .offset = 0 .size = 1024 * 1024 * 1024, // } }; 修改一个LCD配置[不完整] /* * mini2440_features string * * t = Touchscreen present * b = backlight control * c = camera [TODO] * 0-9 LCD configuration * */ //static char mini2440_features_str[12] __initdata = 0tb; static char mini2440_features_str[12] __initdata = 0t; //注：由于linux对mini2440统宝屏和触摸屏支持不好，需要进一步修改，请关注我后续的博客或网上相关资料 修改s3c_gpio_setpull linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h (33行) s3c_gpio_do_setpull函数中 static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, unsigned int off, s3c_gpio_pull_t pull){ if(NULL != chip-config-set_pull) return (chip-config-set_pull)(chip, off, pull); else return EINVAL; } 增加yaffs2文件系统的支持 下载yaffs补丁：http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi 打补丁 将yaffs2拷贝到与linux一个目录下，如我的是/home/user/ root@ubuntu:/home/user/yaffs2# ./patch-ker.sh c /home/user/linux-/ Updating /home/user/linux-//fs/Kconfig U