手机充电器塑料模具的设计.docVIP

摘 要 当今社会，信息化日益发展，手机由于使用的方便，从而从之前的奢侈品变成了大众化的日常用品，渐渐成了生活的必需品。伴随着手机而产生的是五花八门的手机充电器。而模具制造业的发展，成为国民经济中不可或缺的一部分，占有重要地位。本设计从日常生活出发，选择了手机充电器注塑模模具设计这个课题。在结合实际的基础上，分析了手机充电器的工艺特点，介绍了手机充电器外壳上盖注射模结构及模具的工作过程。重点介绍了手机充电器外壳注射模结构的设计方法。分析和阐述了模具型芯零件及各标准件的选材、热处理工艺，手机充电器外壳的塑件的结构要素，塑件的尺寸公差和精度的选择，塑件的体积和质量的计算方法注射机的选择和校核此手机充电器外壳注射模设计的结构特点是点浇口形式的单分型面的注射模该模具结构设计巧妙，操作，，塑件达到技术要求。关键词：手机充电器外壳；注模；型芯；型腔 Abstract Today, the world is becoming more and more information, mobile phones became popular the daily from the luxury articles introduced before, and became the necessities of life. And phone chargers, becomes necessary .The handset battery charger outer covering top head injection mold structure and the mold work process. introduced the handset battery charger outer covering injection mold structure design method with emphasis. Analyzed and elaborated the mold core components selection, the heat treatment craft, the handset battery charger outer covering model the member, model the size common difference and the precision choice, model a volume and the quality computational method. This handset battery charger outer covering injection mold designs the unique feature is the runner form three minute profiles injection molds, is lateral pulls out the coreiniection mold. Forming part of the calculation of the size and mold cooling system design, eventually die of the use of derivative-MASTER / CAM software for the design parameters. This cell phone charger shell injection mold design of the structure is characterized by the form of points runner-alone surface of the injection mold. Die using a two-cavity structure, two pieces of plastic placed parallel direction opposite to the lateral extracting core. Instrument Hot Runner and eliminate waste, but the excessive heat flow is more complicated, ABS plastics and better mobility easy to produce saliva flow, and other use of PP with Hot Runner of plastic, Not only plastic component performance can’t meet the functional requirements, and an increase