E800三偏心碟阀.DOC

E800气动切断调节蝶阀 E800 Air-operated shut-off and adjusting butterfly valves 产品简介 E800系列蝶阀，借鉴了国外先进技术，集国内多年来蝶阀制造和使用经验而自行开发的新一代密封蝶阀本蝶阀采用三偏心多层次金属密封结构,无机械磨损，可达到零泄漏，有优良的双向密封功能,是用于石油、化工、冶金、电力、食品、医药、给排水、气体输送等不同介质的管路上作调节流量、截断或接通流体的最佳装置。???? 选用不同的材质，可分别适用于水、污水、海水、空气、蒸汽、煤气、可燃气体、腐蚀性介质、油品及食品等介质，最高工作温度可达。 Product introduction E800 series air-operated shut-off and adjusting butterfly valves are the new generation sealing butterfly ones developed by using the abroad advanced technology and the many years of domestic experiences of butterfly valve manufacture and application. This kind of butterfly valve applies the tri-eccentric and multi-layer metal sealing and 15°sealing structures, which could realize the zero leakage, without mechanical wear and with good double-sealing function and long useful life. It is the ideal device used for flow regulation, blocking or connecting fluid in petroleum, chemical engineering, metallurgy, electricity, food, medicine, water supply and drainage as well as gas delivery. (See figure1). Different materials are applied to the valves and they are respectively applied to water, sewage, seawater, air, steam, coal gas, combustible gas, corrosive medium, oil product, food and other medium. The maximum working temperature of high temperature resistant model could be up to 800℃. 气动执行器：air-operated actuator 对夹式蝶阀：wafer butterfly valve 阀门定位器：localizer阀位传送器： position transport 阀门定位器支架：localizer holder 空气过滤减压阀：air filtration reducing valve 产品特点及优点 1.三偏心结构：阀杆轴线与蝶板密封面间偏置一个尺寸A，并与阀体通道轴线偏置一个尺寸B，阀座回转轴线与阀体通道轴线形成一个偏心角α，故形成三偏心。蝶阀从0°～°开启时，蝶板密封面会在开启的瞬间立即脱离阀座密封面，在其0°～0°关闭时，只有在关闭的瞬间，其蝶板圆锥形密封面才会接触并压紧阀座圆锥形密封。所以阀座与蝶板上的密封面之间无任何摩擦，去除了磨损和泄漏的可能性。Product features and advantages 1. Tri-eccentric structure (see figure 2): there is a bias dimension A between the valve spindle centerline and butterfly plate sealing face, a bias dimension B of the valve body channel centerline and there forms a eccentric angle between the valve seat axis of rotation and valve b