沈阳市某小区高层住宅楼供暖及换热站设计【毕业论文+CAD图纸全套】.doc

摘要 随着美丽中国的口号的提出，节能减排在建设和谐社会中的推广和实施，集中供暖相对于局部供暖显示了巨大优势，分户热计量更是受到很大关注。 本课题就对沈阳高层建筑集中供暖系统的设计，熟悉供暖设计的程序、内容和基本原则，学习设计的方法步骤，进一步提高运算、制图和使用资料的能力，巩固所学的知识，培养这些知识解决设计问题的能力。 在设计中，通过对设计情况的了解，确定建筑物的热负荷，供暖系统形式的选择，水力计算和校核计算；以及建筑物的平面图和系统原理图。 设计中采用的是采用机械循环、双管制垂直式的上供下回系统。钢制柱式800×600，散热片安装形式为异侧的上供下回，供水立管之间为异程式，户内系统为水平单管顺流式。设计供回水温度为85/60℃。 换热站的设计主要包括设备的布置，定位尺寸确定，换热器的选型，循环水泵，补给水泵的选型及辅助设备的选择计算。 设计说明书中附有所有计算的数据。 关键词：分户热计量 散热器 机械循环 单管顺流 热负荷 abstract With the beautiful Chinese slogans are put forward and the energy conservation and emission reduction in the construction of harmonious society, and promote and implement concentrated heating relative to the local heating showed great advantage. Household heat metering is under great attention This topic is a twenty- five layers of Shen yang building design of central heating system with heating design, program, content and basic principles, methods and steps of the learning design, improve operation and use of drawing and data, consolidate the knowledge, cultivating the ability of solving design problems. In the design, through the design of buildings, determine the thermal load, the choice of the form of heating systems, hydraulic calculation and check calculation, And the building plan and system diagram. Design is adopted by the mechanical circulation, dual control system of vertical purification next.In the design we used Steel column radiator 800×600, radiator for installation of the opposite offer next. Water is made between tube with a program, in the bottom water pipe with roots in process. Choose the outside building600×600 body in a separate room for the equipment room, placed between pump and heat exchanger, indoor system for horizontal single pipe downstream. Design for the return water temperature to 85/60 degrees. Heat exchange station design mainly includes the equipment layout, positioning to determine size, selection of heat exchanger, circulating pump, make-up pump type selection and the selection of auxiliary equipment calcu