检测卡代码(国外英语资料).docVIP

检测卡代码(国外英语资料) Brambling yasutomo lofty ambition is. Thirty thousand in the East Sea, five thousand Ren Yue ferris. He flowers - flowers, swing. Ten years of dream sleep Yangzhou, impossible love. In front of egrets, peach flowers flowing away with water trout. For different motherboard BIOS, the test card is not the same code, but the test card is not perfect, so he just gives us a reference! Do not say much now, direct the fault code that oneself once saw gives everybody to have a look C0: boot detection code shows C0, which is the motherboard BIOS fault or motherboard chip has been bad C1:C1 to test whether the memory through, stop that is, but the motherboard is also suspected of failure C3: memory problems D3 and D4: This is the memory problem, but the motherboard memory slot is also possible, most of them on the AMD board, then you can take the CPU fan out, tighten the CPU, and then conduct power test 25: 25 for graphics or slot problems, generally cleared the motherboard, BIOS will be able to light the machine. Otherwise changed the video card 26 or 2B: bright machine, not bright, consider the video card 31: video card or slot problem 45: video card problem 00: just boot directly to 00 or FF is CPU or motherboard chip is bad FF: just boot directly to 00 or FF is CPU or motherboard chip is bad, or may be insufficient power supply 13: the AMI BIOS13 is normal 75:BIOS fault, reset the BIOS can be 00: boot code goes to the last show as this is normal already light FF: boot code goes to the last show as this is normal already light Write here at present, think tonight the code that shows in maintenance, those, hope everybody friend also helps add!! Original: test card description code meaning Code Award, BIOS, Ami, BIOS, Phoenix, BIOS, or Tandy 3000 BIOS 0 shows the configuration of the system. The INI19 boot loader is about to be controlled. . 01 processor test 1, the processor status is verified, and if the test fails, the loop is infinite. The processor register