电子时钟程序_2(国外英语资料).docVIP

电子时钟程序_2(国外英语资料) The first time /*******************6604 works (digital clock) speaker: Wu Xiuquan ~ ~ ~ * Basic function: 1, / * * display time. 2, you can use the button to adjust the time. 3, use the timer **/ / * * extensions: 1, set the alarm. 2, year, month and day show. 3, countdown function. 4, the whole point timekeeping function ************/ / * * program design: Wu Bin. ~~2009-07-19**/ #include REGX52.H #define uchar unsigned char #define uint unsigned int Sbit s5=P3^5; //s5 button, set the tune Sbit s3=P3^3; //s3 button plus 1 Sbit s4=P3^4; //s4 button, minus 1 Sbit s2=P3^2; //s2 button; toggle display Sbit FM = P1^7; / / buzzer Sbit led1=P1^0; Sbit led2=P1^1; Sbit led3=P1^2; Sbit led4=P1^3; Sbit led5=P1^4; Uchar code tab[11] = / / digital encoding {0x3f, 0x06,0x5b, 0x4f, 0x66,0x6d, 0x7d, 0x07, 0x7F, 0x6f, 0x40}; Uchar code scan[8] = / / digital pipe select encoding {0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f}; Uchar chunshu[8] = {0}; / / storage, minutes and seconds and initialization Uchar table1[]={31,31,29,31,30,31,30,31,31,30,31,30,31}; / / leap year Uchar table2[]={31,31,28,31,30,31,30,31,31,30,31,30,31}; / / non leap year Uchar num; //uint DAO; //uchar DelayA; / / the alarm time //uchar QIAN; / / (countdown countdown of the biggest digital: thousands of thousands), 100, ten, a bit //uchar BAI; //uchar SIH; //uchar GE; Uchar K; Uchar t; Uchar x; Uchar index; Uchar d_sec; / / adjust the countdown time seconds Uchar d_hour; Uchar d_min; Uchar sec; Uchar hour; Uchar min; Uchar i; Uchar j; Uchar nz_hour; / / clock, minutes and seconds Uchar nz_min; Uchar nz_sec; Uchar day; / / year / month / day Uchar week; Uchar mon; Uint year; Uchar, set_2=1, set_5=1; Void delay (uchar K); / / delay subroutine Void (cshu); / / cache //void (LED); / / time display subroutine Void (turn); / / adjustment subroutine Void (init); / / initialization subroutine Void (key); / / key control hoursminutes seconds Void (key_change); / / switch display function keys Void (ke