电脑检测卡代码(国外英语资料).docVIP

电脑检测卡代码(国外英语资料) Computer master board detection card (that is motherboard detection card) use Motherboard diagnostic (detection) card: also known as POST card or Debug card He is using the current ATX BTX structure, and other similar structures or compatible with the X86 structure of the computer standard implementation procedures, and through circuit testing to detect whether there is damage Start this standard computer when the trigger signal from the switch, COMS front-end circuit is initialized using the 5VSB power to maintain, and the detection of 5VSB is normal, then the MOS controller is connected to the switching power supply circuit signal in 5VSB + line, PWM monitor, the startup disk 12V disk initialization circuit, 5V circuit, initialization memory power, initialization processor power, incorporated into the PCI bus power supply (if PCI-E starts PCI-E, followed by AGP and then PCI to ISA) when completed after power In accordance with the COMS rules, submit the self-test chip control, respectively on board all equipment for testing, because the PCI AGP ISA PCI-E bus has a signal circuit, the signal loop is not only as their own initialization circuit, also as a feedback loop, this motherboard detection card can use this signal to judge the work situation of most equipment circuit And through the other pins of the PCI slot, check all the computers careful conditions, including the display card and bus status, disk status, processor, memory, and so on Anyway, thats how he works All of these signals are pulsed DC signals. They carry a certain amount of information, which is displayed on the monitor after the decoding of the detection card, or through the indicator light, while the power supply is displayed directly with the indicator light If you cant pass the test, record it and report it, so you can find out what is wrong with it But for reference only, the test card is not a perfect thing. He often fails to check the status, so you cant just use his result