英文版patran实例教程Bimaterial_Plate.pptVIP

WS2-* PAT301, Workshop 2, September 2007 Copyright? 2007 MSC.Software Corporation  Bi-material Plate Step 1. Create a Database Create a database named cantilevered_plate.db and specify the model preferences: File / New Enter Bimaterial as the file name. Click OK. Choose Default Tolerance. Select MD Nastran as the Analysis Code. Select Structural as the Analysis Type. Click OK. a b d f c g e Step 2. Create Geometry of the Plate Geometry: Create / Surface / XYZ Click under Vector Coordinates List and enter 2 1.6 0. Click Apply. b c a Step 2. Create Geometry of the Plate(Cont.) Geometry: Create / Curve / 2D Circle Input the radius 0.3 Input Center point [1 0.8 0] Click Apply b c a d Step 2. Create Geometry of the Plate (Cont.) Geometry: Edit / Surface / Break Select ‘Delete Original Surfaces’ Input Surface 1 Input Curve 1 Click Apply b c a d e c d Step 3. Create Group of the Plate Click Group/ Creat Click under New Group Name and enter fibre Click under Entity Selection and select Surface 3 Click Apply b c a b d Step 3. Create Group of the Plate (Cont.) Click under New Group Name and enter matrix Click under Entity Selection and select Surface 2 Click Apply a b b c Step 4. Meshing with Quad4 Elements Click Group/post Select fibre Click Apply Elements: Create / Mesh / Surface Select Elem Shape: Quad Mesher: Paver Topology: Quad4 f. Click on Surface List and select Surface 3. g. Input global Length : 0.1 h. Click Apply. d e f g h a b c f Step 4. Meshing with Quad4 Elements (Cont.) Click Group/post Select matrix Click Apply Elements: Create / Mesh / Surface Select Elem Shape: Quad Mesher: Paver Topology: Quad4 f. Click on Surface List and select Surface 2. g. Input global Length : 0.1 h. Click Apply. d e f g h b c f Step 4. Meshing with Quad4 Elements (Cont.) Click Group/post Select fibre and matrix Click Apply Elements: Equivalence/ All / Tolerance Cube e. Click Apply. b a c d e Step 4