Specification选读.docx

技术协议书SPECIFICATION名称/NAME:甲方/PARTY A:乙方/PARTY B:日期/DATE: 2016.08.25目录/Content设备概览Overview of Equipment设计要求/Design Requirement动作说明/Motion Description主要机构说明/Main Mechanism Description设备标准配置及附件/Standard Configuration设备主要部件品牌及型号/Brand and Type of Main Parts技术参数表/Technology Parameter设备性能要求/Performance Requirement运输及安装调试/Transportation, Installation and Trial Run验收条件/Acceptance Condition大日程/Master Plan售后/After Sale甲方及乙方，经过友好协商，对乙方提供的自动化设备的技术要求、质量保证等事宜，达成一致意见，特制订该技术协议。This specification is entered into by and between PARTY A and PARTY B through friendly consultations. It is about the technical requirement and quality guarantee etc. for the automation device that designed and manufactured by PARTY B.本协议以中英文双语方式起草，一式两份，如有冲突，以中文为准。This specification is prepared both in Chinese and English version, it will be held in two copies of the same form, and in the event any conflicts, arises out of the two versions, the Chinese version shall prevail.设备概览/Overview of Equipment设计要求/Design RequirementNO.分类/Item内容/Content备注/Remark16S外观整洁，没有破损，没有尖尖角角有可能造成作业员伤害的地方；Clear and neat appearance, no damage and nothing may cause harm to workers;26S水电气安装整齐，标示清晰完整，没有裸露的线头，没有安全隐患；Utility lines installation\marked tidy, clear and complete, no bare threads, and no hidden dangers;36S标示整齐、完整、正确;Having neat, integrated and right sign or mark;46S场地尺寸12米*6米;Space 12m*6m;5工艺/Process不锈钢材料，直径φ20～φ100mm，厚度0.8～3mmStainless steel tube, diameter φ20～φ100mm, thickness 0.8～3mm6工艺/Process原材料长度6mRaw material length 6m;7工艺/Process单次送料长度 10～1000mmFeeding length 10～1000mm at single time;8工艺/Process伺服自动供料，自动取出加工好的产品，自动排屑系统Servo auto feeding, auto get the cut tubes out of the machine, auto remove the metal chips;9工艺/Process完成品通过机器人竖直放置在料箱里Finished goods is vertically placed in box by robot10工艺/Process锯切精度±0.1mmSawing accuracy ±0.1mm11效率/Capacity加工直径φ60mm厚度1.5mm材料，循环时间=30秒;Cycle time MAX 30 sec produce φ60mm and thickness 1.5mm material;12效率/Capacity换型时间=5分钟Change over time max 5 mins13品质/Quality质量符合TAJCO标准,FPY 99.5%;Quali