PROE 野火5.0之曲面造型(style isdx) 新功能(国外英语资料).doc

PROE 野火5.0之曲面造型(style isdx) 新功能 Styling window (Note: styling features are super features, and there can be father son relationships between common features) 4 window points, select 4 window icon switch. 1 window changes, 4 windows are updated simultaneously. 1 new 4 NEW The CTRL +D key is restored to the standard four window view Standard four look Adjust the window, drag the window, the boundary cross line, adjust the size of each window Select the graphic of the activity plane and select the datum plane (the drawing plane attribute). Facing the right side of the plane the direction of the moving plane (the point of view attribute). The inner plane diagram is in the same column as the movable plane. The same plane construction method, but the same characteristics as modeling. The constructed datum plane changes into active plane in real time. Note: the difference between free curve and the plane curve, the reference slide within the reference can change the active plane, offset can offset existing activities to establish a new plane moving plane, while the internal surface in a more flexible way to establish a new plane activities. Environment settings modeling preferences Molding curve The free curve creates a curve icon, draws a line, ends the middle key, then draws another line, and the middle key ends... To complete the green tick curve (or press button), black tick exit feature Drag into 3D. By editing the curve icon, you can drag it into a 3D curve, while a flat curve does not. Before dragging, youd better set the moving plane and make it look straight. Plane curve Not 3D Cos curve Do not cross the boundary without crossing the boundary between the surfaces (the boundary of the surface will have the geometry of the surface) and the boundary between the surfaces (regardless of whether the surface is merged). An inner boundary that can cross a boundary but can cross a boundary to blend a surface or a curved surface. The drag plug allows one to pull one, more,