protel99se常用元器件封装(国外英语资料).doc

protel99se常用元器件封装 Part Encapsulation refers to the appearance and the position of the solder joint when the actual part is soldered to the circuit board. Is a purely spatial concept, so different components can share the same parts, and the same components can also be packaged in different parts. As a traditional needle type resistance, the element size is large, the circuit board must be drilled to accommodate components, upon completion of the drilling, insert, and tin or tin spraying (or hand welding), high cost, newer designs are used in surface mount small volume type element (SMD) of the element without drilling, steel film semi fused solder paste into the circuit board, and then put on the SMD element, can be welded on the circuit board. Resistance AXIAL Non-polar capacitor RAD Electrolytic capacitor RB- Potentiometer VR Diode DIODE Triode TO Power supply block 78 and 79 series TO126H and TO-126V The FET is the same as the triode D44 D37 D46 rectifier bridge Single row multi pin socket, CON, SIP Dual in line element DIP Crystal oscillator XTAL1 Resistors: RES1, RES2, RES3, RES4; the package attribute is axial series Non-polar capacitor: cap; the package property is RAD-0.1 to rad-0.4 Electrolytic capacitor: electroi; the package property is rb.2/.4 to rb.5/1.0 Potentiometer: Pot1, pot2; encapsulation property is VR-1 to vr-5 Diode: the package property is diode-0.4 (small power) diode-0.7 (high power) Triode: common packaging attributes for TO-18 (ordinary triode), to-22 (high-power transistor) TO-3 (high-power Darin) Catheter The power regulator blocks have 78 and 79 series; the 78 series, such as 780578127820, etc. The 79 series has 790579127920 Common encapsulation attributes are to126h and to126v Rectifier bridge: BRIDGE1, BRIDGE2: package attributes for the D series (D-44, D-37, D-46) Resistance: AXIAL0.3-AXIAL0.7, where 0.4-0.7 refers to the length of resistance, usually AXIAL0.4 Ceramic capacitors: RAD0.1-RAD0.3. Where 0.1-0.3 refers to the size of th