R600a电冰箱的高压压力 比拟准(国外英语资料).doc

R600a电冰箱的低压压力 比较准 Low pressure of R600a refrigerator Recently on the Internet saw a lot of low pressure on the R600a refrigerator, there are forums, Baidu questions also have... In short, the answer is not a unified, some say it is positive pressure, but also said negative pressure. If the pressure is positive, then how much is low, and if the negative pressure, then how much should it be? First, according to the pressure enthalpy diagram of R600a. At the standard atmospheric pressure (that is, absolute pressure is about 0.1MPa), the evaporation temperature is -11.8 degrees centigrade. We know the temperature according to the grade of the refrigerator, a star is not higher than -6 degrees Celsius, two star is not higher than -12 degrees Celsius high star is not higher than 15 DEG C, Samsung level not higher than 18 DEG C, 4 less than 24 degrees celsius. Well, based on these data, we can tell whether or not the pressure in this refrigerator is positive or negative. If a refrigerator is a star, then set the evaporation temperature of -6 degrees centigrade. Then the evaporation pressure should be higher than 0.1MPa. Be positive. Well, other stars must be working in the negative pressure in order to achieve the evaporation temperature. The lower the evaporation temperature, the lower the evaporation pressure. So only the evaporation pressure is reduced to reduce the evaporation temperature. Also, when the maintenance of the refrigerator for more than two stars, encountered excessive refrigerant charging, the trachea appeared frosting, then what should I do?. The gauge shows the pressure, but excessive charging, so can only emit excess. Just think, the low pressure is negative pressure. Is this the refrigerant that you can release? Then we can only stop and wait for the pressure balance. The process pressure has increased. And when you put off the refrigerant, do you know how much to put in? Its impossible to put the machine on. In fact, it doesnt have to be so trouble