protel99常用元件的电气图形符号和封装形式(国外英语资料).doc

protel99常用元件的电气图形符号和封装形式 Electrical, graphic, symbolic, and encapsulated forms of Protel99 common components 1. resistance diagram commonly used in the name of RES1-RES4; pin package form: The AXIAL series ranges from AXIAL-0.3 to AXIAL-1.0, and the suffix numbers represent the spacing of the two pads, Kmil. 2. capacitor diagram commonly used in the name of CAP (non-polar capacitor), ELECTRO (with polarity capacitor); pin package type: non-polar capacitor RAD-0.1 to RAD-0.4, there is a polarity of capacitance from RB.2/.4 to RB.5/1.0. 3. potentiometer schematic commonly used in the name of POT1 and POT2; pin package form: VR-1 to VR-5. The name of the 4. commonly used principle in DIODE diode (common diode), DIODE SCHOTTKY (Schottky DUIDE TUNNEL (tunnel diode) diode) DIODE VARCTOR (variode) ZENER1~3 (zener diode) 5. pin package form: DIODE0.4 and DIODE 0.7; pin package form: non polarity capacitor 6. triode schematic diagram commonly used in the name of NPN, NPN1 and PNP, PNP1; pin packaging form TO18, TO92A (ordinary triode), TO220H (high-power transistor) TO3 (high-power Darlington tube) 7. FET name commonly used in JFET N principle (N channel JFET), JFET P (P channel junction field effect transistor (MOSFET) N N channel enhancement mode P (MOSFET tube) P channel enhancement mode transistor) and transistor with pin package form. 8. rectifier bridge schematic commonly used in the name of BRIDGE1 and BRIDGE2, pin packaging for the D series, such as D-44, D-37, D-46 and so on. 9. single row multi pin socket schematic diagram commonly used in the name of CON series, from CON1 to CON60, pin packaging form for SIP series, from SIP-2 to SIP-20. 10. dual in line component schematic commonly used in accordance with the name of the different functions, pin package DIP series. 11. series parallel port class diagram, commonly used in the name of DB series, pin packaging forms for the DB and MD series. 12 、 crystal oscillator: CRYSTAL; package: XTAL1 13, led: LED; packaging c