卫生洁具安装工艺标准(国外英语资料).doc

卫生洁具安装工艺标准 I. construction preparation 1. material requirements 1) sanitary ware specifications, models must meet the design requirements; and the factory product certification. Sanitary ware appearance should be regular and modeling, Zhou Zheng, smooth surface, beautiful, no crack, smooth edge, consistent tone. 2) sanitary ware parts specifications should be standard, reliable quality, smooth appearance, uniform electroplating, clear thread, nut moderate tightness, no blisters, cracks and other defects. 3) the water tank for sanitary ware should be water saving type. 4) other materials: galvanized pipe fittings, Leather Money cut-off valve, a valve and a water faucet, eight thread, drain the water return bent and galvanized dovetail bolt and nut, rubber plate, copper wire, putty, lead screw, solder, cooked, hydrochloric acid, lead oil, hemp, asbestos rope, white cement, lime and plaster etc. the material shall comply with the standard requirements. 2. main machines and tools 1) machines and tools: wire threading machine, grinding machine, grinding wheel saw, electric drill, impact drill. 2) tools: clamp, hand saw, iron, cloth scissors, wrench, spanner, wrench, homemade fork hammer, hand shovel, chisel, cutting pliers, a screwdriver, square, iron, etc.. 3) other level, scale, compasses, thread, small line, box ruler, etc.. 3. operating conditions 1) all connecting pipes and sanitary ware pressure, closed water test has been completed, and has been well hidden pre screening procedures. 2) the stable installation of the bathtub should be done with the civil engineering after the waterproof layer and the protective layer. 3) other sanitary ware should be installed in the interior after the completion of the basic stability. Two, operation process 1. process Installation Preparation: sanitary ware and accessories inspection sanitary ware installation: sanitary ware fittings pre assembled sanitary ware steady installation sanitary ware wall and floor gap treatment sanita