多线蜗杆车削(国外英语资料).doc

多线蜗杆车削 Analysis and application of multi thread turning method in [2006 annual paper 2007-01-12 [Abstract] Based on the analysis of multiple thread processing in line method and line accuracy, overcome the difficulties encountered in the process of understanding the matters needing attention, improve the skills of distributing and processing accuracy, so as to improve the level and quality of turning processing. Multi line thread; branch line method; alignment accuracy Multi threaded processing line is mainly to solve the problem of thread, according to the multiple thread helix in the axial and circumferential directions of equidistant distribution characteristics, distribution methods are common: axial line method and circumference method of lines two. Axial division method When the car is a good spiral groove, the tool is moved along the axis of a pitch, and then second spiral groove. This method is mainly how to solve the problem of accurately moving a pitch. Specific methods are as follows: (1) slide marking and dividing line method. This method utilizes the line mark of the small slide plate to make the tool move a pitch along the axial direction so as to achieve the purpose of line distribution. This method is simple, no other accessories and devices, the use of the inherent small slide plate and scale, you can achieve the purpose of line distribution. The accuracy of the line is executed by the accuracy of the shifting of the small slide plate and the accuracy of the operation method. Matters that must be paid attention to when dividing line: 1, the line must be parallel with the working axis of the small slide guide before the line, or it will produce errors. The method is simple correction: cylindrical lathe in the length of about 150mm (more than 100), the amount of its diameter, have no taper error, then the dial indicator is arranged on the cutter frame, the surface contact dial indicator measuring head and processing, mobile small skateboards, can get