柔性版制版(国外英语资料).doc

柔性版制版 Flexo plate making Flexographic printing is a kind of environmentally friendly printing, has been developing rapidly, the flexible version has high elasticity, high rate of resistance to Indian high resolution. To produce high quality plates, in addition to high-quality plates, we also need high-quality plate making technology and plate making equipment. Taking JS900 flexible plate making machine as an example, this paper introduces the technical characteristics of flexible plate making. Flexible plate making machine JS900 type flexible plate making machine combines exposure, washing, drying, post-processing four processes in one. All the procedures are controlled by high quality electrical apparatus, with accurate data, high accuracy and easy operation. The function of the equipment is as follows: 1. Exposure: using the Korean national special plate making lamp as the exposure light source, and the light source is stable. 2, washing version: the use of two-way automatic washing version, washing version of the brush fine, very good, can make more than 200 lines of net version and relatively fine lines and small text. 3, drying version: automatic temperature control, heating evenly. 4, after treatment: the use of Shanghai brand, in addition to sticky tube, mixed exposure, time-saving and efficient work. Two, flexo plate making process Flexible plate making process: copy, film (negative), exposure, irrigation, drying, post-processing. 1, the original manuscript design: suitable for flexible printing should have the following characteristics: the color number, but does not require the overprint; reproduction of the small details; the cable is not too high, but can achieve the effect of color printing can be made on-line packaging processing. 2, film (negative): meet the plate needs, by a clear, accurate size specifications; the use of frosted films; the film requires four corner density; the use of the CNS by transmission membrane; density measurements, white de