汽车ASR系统(国外英语资料).doc

汽车ASR系统 First, what is ABS? ABS anti lock braking system (BrakeSystem AntiLock) The harm of automobile front wheel lock: losing the steering ability; Harm of automobile rear wheel lockup: lose anti-skid capability, flick, sideslip; Two, ABS purposes When the automobile is braked, prevent the wheels from locking on the road slip, in order to improve the directional stability during braking and steering control ability and shorten the braking distance, make braking safer and more effective. Four, the relationship between wheel slip ratio and adhesion coefficient Adhesion = pressure * adhesion factor The factors affecting the adhesion coefficient include the tire structure parameters, the applied load and the internal pressure, as well as the use of speed and pavement conditions, as well as the slip rate Five, ABS role The slip ratio of the automobile wheel is kept near the slip rate corresponding to the maximum adhesion. The composition and working principle of ABS Usually, ABS is composed of wheel speed sensor, ABS electric control unit, braking pressure regulating device and braking control circuit on the basis of common braking system. Advantages of ABS systems It improves the stability of the braking, shortens the braking distance and improves the wear condition of the tyre Another advantage of the ABS system is its ease of use and reliable work Shortcoming: (1) the amplitude of the output signal varies with the speed (2) the response frequency is not high (3) the ability to resist electromagnetic interference is poor Principle and structure of main components of ABS system Wheel speed sensor characteristics: (1) the amplitude of the output signal voltage is not affected by the speed. (2) high frequency response (3) strong ability to resist electromagnetic interference Two, ECU Three. Brake pressure regulator (circulation type) ABS inspection notes: 1., when the ignition is in the ignition position, do not disassemble the electrical components and wiring harness