油井名词解释(国外英语资料).docVIP

油井名词解释 First of all it is below the term is from a Petroleum Forum was removed in this non accurate summary of my original order has been mocongkaozheng because these things are very practical on the site for days after the search can also be convenient to oil Tongren I think the original purpose is to benefit the public would like to thank the original but also hope that more people benefit from this 1: Well, in order to explore the development of oil and gas for the purpose of drilling in the formation of a certain depth of cylindrical perforation. 2: wellhead: open end of the well. 3 bottom hole: bottom of the well. 4, naked eye: no casing section of the section. 5, the depth from the surface to the bottom of the depth of the rotary bushing. 6: borehole: cylindrical surface of the borehole. 7 annulus: when there is a pipe string in the well, the cylindrical space between the shaft wall and the tubular column or between the pipe column and the pipe column. 8, borehole axis: the central line of the borehole. 9, well structure: refers to the drill drill depth, the corresponding drilling section diameter, the number of layers under the casing, diameter and depth, the cement outside the casing back high, as well as artificial bottom hole. 10, artificial bottom hole: the design of the lower reservoir of the choke or cement plug surface. (Note: the definition is incomplete and the artificial bottom hole is variable) 11. Types of wells: the general class of wells divided by a certain basis. According to the objective of drilling can be divided into wells and development wells; according to the drilled depth can be divided into Asakai (1200m), wells (1200 ~ 3000m) and deep (3000 ~ 5000m) and ultra deep (5000m); according to the shape of the borehole axis can be divided into straight wells and directional wells. 12, wells: refers to the understanding of the age of the strata, lithology, thickness, reservoir cap combination and regional geological structure, geological prof