油气润滑(国外英语资料).docVIP

油气润滑 Oil-gas lubrication Oil and gas lubrication is called gas-liquid two-phase fluid cooling lubrication technology in academia. It is a new kind of lubrication technology. It has incomparable advantages compared with the traditional single-phase fluid lubrication technology Superiority. It has successfully solved the difficult problem that dry oil lubrication and oil mist lubrication can not overcome. It is one of the wonderful flowers blooming in lubrication technology. It has adapted to the machinery industry equipment The utility model is especially suitable for occasions with high temperature, heavy load, high speed, extremely low speed, and cooling water and dirt invading the lubrication points in bad working conditions. Because it can solve the tradition The single-phase fluid lubrication technology can not solve the problem, and has a very obvious use effect, greatly prolongs the service life of the friction pairs, and improves the field environment, and therefore is getting more and more More widely used, especially in the field of metallurgical industry. Before defining the oil and gas lubrication, lets take pneumatic pneumatic lubrication system as an example to find out how the oil and gas lubrication works Work principle. Pneumatic lubricating system mainly consists of main station, two stage oil gas distributor, PLC electric control device, middle connecting pipeline and pipeline accessory. Main station is moistening Oil supply and distribution, compressed air treatment, oil and gas mixing and oil and gas flow output, and PLC electrical control assembly. According to the oil demand of lubricating equipment and the preset working procedure Pneumatic pump。 Compressed air is treated by a compressed air treatment device. The lubricating oil is distributed to the oil and gas mixing blocks connected with the compressed air network after being distributed by the progressive distributor The oil and gas mixture is mixed with compressed air to form oil and gas