混凝土搅拌车发卖技巧资料(国外英语资料).doc

混凝土搅拌车销售技术资料 This article is contributed by sfdltax DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Concrete mixer truck sales technical data I. brief introduction of concrete. Concrete is made of cement, water, sand, stone and additives in proper proportion. They are mixed into artificial stone which is hardened by mixing at a certain time. The bulk density of concrete is usually calculated at 2.4T/M 3. The fluidity of concrete has a great influence on the transportation and irrigation of concrete. The index of concrete fluidity is usually the size of concrete slump. Method of measuring the degree of slump is: mixed concrete is a standard cone slump cone (bottom), ramming scraping, vertical lift cylinder, due to weight, concrete will produce a slump phenomenon, then a downward slump size (mm), is the slump. According to the size of the slump, concrete can be divided into: high fluidity concrete (slump is greater than or equal to 160mm), liquidity (concrete slump for 100 ~ 150mm), plastic (concrete slump for 50 ~ 90mm), the bottom of the plastic concrete (slump for 10 ~ 40mm) and dry (concrete slump less than 10mm). The special two chassis converted two, the structure and working principle of concrete mixing truck, mainly used to transport with the uniform requirements of concrete, is a kind of ideal, modernization, no pollution of the concrete transportation equipment. This series of concrete mixing truck hydraulic mechanical transmission of the mixer, which is mainly composed of the following parts: automobile chassis, hydraulic drive system, water supply system, a frame, a stirring barrel, control system, feeding system, see discharging system and related accessories (Figure 1). Figure 2. figure 1. general chassis hydraulic drive system of 3. water supply system 4. 5. 6. frame mixing tube feeding system control system 7. 8. discharging system 1. mixing drum Mi