空心转轴结构的优化设计(国外英语资料).docVIP

空心转轴结构的优化设计 Optimum design of hollow rotating shaft structure Wuhan Institute of food industry (Wuhan 430022) Zhang Lin The optimum design process of hollow rotating shaft structure is introduced. The hollow rotating shaft developed according to the optimization result has been applied to the production practice Good economic results have been obtained. Keywords hollow shaft; structure optimization; design; Abstract, This, paper, introduces, the, optimum, design, of, the, hollow, rotating, shaft, structure,, The, shaft, which Depends, on, the, optimum, result, been, applied, into, the, production, practice, has, and, the,, satisfactury, effects, of, technique And, economy, have, been, achieved... Keywords, hollow, rotating, shaft, structure, optimum, design We have met one of our scientific research subjects The design of the hollow shaft, in order to achieve satisfactory results, I The factors that affect the structure of the shaft are analyzed And optimize the design on the computer according to the optimization Results the developed rotating shaft has been applied in practice For good economic results, the design is outlined below. 1 Analysis and treatment of structural scheme and design parameters Treatment of section shape and span. The shaft is one For large span shafts, the span between the two supports is near 6m long, which is alleviated The axle must be designed as a hollow shaft, a circular section Noodles。 As a result of the overall structure and the use of the requirements of restrictions, The span l cannot be reduced any longer, and the L is treated as a constant. Other relevant treatment measures. Put the concentration near the branch Seat so as to extend the end as short as possible; the parts between the two supports are as far as possible Dispersing or uniformly distributed into concentrated or smaller sets Medium or uniform load; avoid slotting in dangerous section; increasing The transition fillet radius R at the mutation improves the force actin