箱梁节段预制与拼装施工监理(国外英语资料).doc

箱梁节段预制与拼装施工监理 Construction supervision of precast and assembled section of box girder [Abstract] combining with the prefabrication and assembling technology of the box girder section of Sutong and Jimei bridge in our company, this paper briefly introduces the main points of construction supervision, and puts forward some experiences and suggestions. Key words: box girder segment prefabrication and assembly; supervision control points; experience and suggestions 1 project overview Sutong Bridge B2, D1 and Jimei bridge C4 standard, the upper structure of prestressed concrete continuous box girder, the use of short-term matching method of prefabricated, TP75 type bridge erection machine. The Sutong Bridge B2, D1 standard superstructure with the left and right two deck layout, wide 34.0m, high beam 3M, span 75m box girder segment length is divided into 2m, 3M, 3.3m, 3.5m, 3.6m, 4.0m and 4.5m seven, section 84.6 ~ 287.6t. The upper structure of C4 bridge of Jimei bridge adopts left span road bridge, BRT bridge and right width road bridge three, The main bridge with variable cross section continuous box girder span is 55+2 * 100m+55m, deck width 12.75m, cross section of 3M beam, the fulcrum beam height 6m, the length of each segment is divided into 1.7m, 3.85M, 4m, 4.7m, 5.4m five, section 66 ~ 220t. The approach beam height is 3M, the span is 50m, and the section length is divided into 2m, 3.23M, 3.27M, 3.5m, 3.7m and 3.75m, and the weight of segmental box girder is 55 to 180t, and the span length is. Key points of construction supervision of 2 section box girder Precast 2.1 section box girder 2.1.1 template system security (1) the steel formwork should be designed and manufactured by professional units (Singapore YWL company), which requires the formwork to have the advantages of large rigidity, good stability and high accuracy. (2) release agent by Italy sika, when used in 25m2/Kg for brushing, brushing the template surface should be cleaned up. (3) the template syste