计算机绘图(本)00784 作业(国外英语资料).docVIP

计算机绘图(本)00784 作业 Teacher: first set Teacher: 1A, 2C, 3D, 4B, 5D, 6B, 7A,, 8D, 9B, 10C 11A, 12A, 13A, 14A, 15A, 16B, 17A, 18B, 20A, 19B Teacher: engineering drawing, simulation and animation, scientific visualization, statistical calculation management, measurement; material structure, medical chart, art design. Teacher: (1) click the Circle button on the drawing toolbar. (2) select the Circle menu in the drawing drop-down menu (3), type the Circle command name in the command line, and (4) select the Circle command on the screen menu Teacher: second sets Teacher: the 3 ways to draw a profile line are standard, outermost, and ignore Teacher: the ORTHO command is used to turn on or off the orthogonal mode, and the function key is F8 Teachers: point by point comparison, numerical differentiation, and Bresenham are commonly used methods for generating straight lines Teachers: the commonly used geometric modeling methods are wireframe modeling, surface modeling, solid modeling, feature modeling and fractal modeling. Teacher: plotter belongs to graphic output device. The monitor belongs to graphic output device. Teacher: the common free curve has three parameter curves, Bezier curve, B-Spline curve and NURBS curve. Teacher: write a single line text, select the TEXT command. Teacher: the user can use the function key F2 to switch between the text window and the graphics window. Teacher: 9C, 10B, 11B, 12D, 13B, 14C 15A, 16A, 17A, 18A, 19A Teacher: numerical input, coordinate input, distance input, angle input Teacher: third sets Teacher: size, line, size, line, arrow, size, text, etc.. Teachers: point by point comparison, numerical differentiation, and Bresenham are commonly used methods for generating straight lines. Teachers: the commonly used geometric modeling methods are wireframe modeling, surface modeling, solid modeling, feature modeling and fractal modeling. Teachers: the commonly used geometric modeling methods are wireframe modeling, surface modeling, solid model