软起动器基础问答十例(国外英语资料).docVIP

软起动器基础问答十例 1. what is a soft starter? What is the difference between it and frequency converter? Soft starter is a new type of motor control device, which includes soft starting of motor, soft stop, light load, energy saving and various protection functions. It is called Soft Starter abroad. The utility model is mainly composed of a three-phase anti parallel thyristor connected in series between the power supply and the controlled motor, and an electronic control circuit thereof. Different methods are adopted to control the turn-on angle of the three-phase anti parallel thyristor, so that the input voltage of the controlled motor varies according to different requirements, and different functions can be realized. Soft starters and inverters are two entirely different uses. The inverter is used for the need for speed place, its output voltage and frequency change not only change; the soft starter is actually a regulator for motor starting, output voltage and frequency change not only change. Inverters have all of the soft starter functions, but they cost much more than soft starters and have a much more complex structure. 2. what is the soft start of the motor? What are the starting modes? Based on the soft starter is connected between the power supply and controlled motor, control the turn-on angle of thyristor, the motor input voltage from zero to a preset function increased gradually, until the end of starting, the motor is given full voltage soft starter, soft starter in the process of the motor starting torque increases gradually, speed increased gradually. The soft start has the following several kinds of starting methods generally. (1) ramp soft start. This mode of starting is the simplest, and does not have the current closed loop control, only adjusts the thyristor conduction angle, causes it and the time certain function relations to increase. The disadvantage is that, due to the no current limit, the motor will start to produce a larger impact current in