钳工基础知识试题一(国外英语资料).docVIP

钳工基础知识试题一 Maintenance fitter position test database 11 Fill in the blanks: 1. The main performance parameters of hydraulic pump include flow rate, volume efficiency, pressure, power, mechanical efficiency and total efficiency. 2, the hydraulic pump has many kinds, common gear pumps, vane pumps, piston pumps, screw pumps. 3, hydraulic control valves can be divided into directional control valve, pressure control valve, flow control valve three categories, 4, the pressure control valve is used to control and adjust the hydraulic system working pressure, in order to achieve the required actuator force or torque. 5 、 the pressure control valve includes relief valve, relief valve, sequence valve, etc.. 6, flow control valve is to control, adjust the flow of oil through the valve port, and make the actuator corresponding movement speed. 7, flow control valve, throttle valve, speed control valve. 8, the function of one-way valve is to make the oil flow in one direction only. 9. The function of the direction control valve is to control the direction of the oil flow in the hydraulic system, so as to change the direction of movement or the working order of the actuator. 10, reversing valve is the use of spool and valve relative movement to change the direction of oil flow, turn on or off the oil circuit. The legal length marked on the machine drawing is mm, and the length of the legal length is 1 inches =25.4 mm Rust removal methods are divided into mechanical derusting, chemical rust removal, electrochemical rust removal. The key joint is divided into loose key joint, tight key joint and spline joint. The rolling bearings are divided into centripetal and thrust types according to the direction and magnitude of the load to be carried. The error of measurement method includes systematic error and random error. The common methods of demolition include strike unloading, drawing, top pressing, temperature difference and destruction. Cut the main file from file on the working surf