锅炉运规试题 2010.6(国外英语资料).docVIP

锅炉运规试题 2010.6 Fill in the blanks 1, combustion must have three conditions, both combustible material, there should be combustion supporting substances, there should be enough temperature and heat or open flame. 2, the medium that can realize the conversion of heat energy and mechanical energy is called working substance. 4. The heat transfer process of the water wall is that the flue gases radiate heat to the outer wall of the tube, the outer wall of the tube conducts heat to the inner wall of the tube, and the convection between the inner wall of the pipe and the mixture of steam and water is exothermic. 5 when the superheater is arranged downstream, the heat transfer effect is poor due to the small average temperature difference between the heat transfer. 6, the surface of boiler heating surface ash or slagging, will make the pipe medium and flue gas heat exchange when the heat transfer is reduced, because the ash has a small coefficient of thermal conductivity. 7, the drum is heating, evaporation, overheating of the three processes connecting hub. 8, depending on the density of the work medium, the boiler water cycle is called the natural circulation. 9. The function of the superheater is to heat the saturated steam from the drum to superheated steam. 10, according to the mode of heat transfer, superheater can be generally divided into convection superheater, radiant superheater, semi radiant superheater. 11, the role of economizer is to use the waste heat of the tail gas of boiler to heat the boiler feed water. 12, the role of the air preheater is to use the waste heat of the tail gas of the boiler to heat the air used for combustion. 13. The three temperatures that indicate ash melting characteristics are called deformation temperature, softening temperature and melting temperature. 14 the heat loss of exhaust gas is the biggest in the heat loss of boiler. 15. Flush water level shall stand on the side of water level gauge. Be careful when opening the valve. 17