24c256跨页存取(国外英语资料).doc

24c256跨页存取(国外英语资料) # include reg52. H # include INTRINS. H 10 # define the ERROR Sbit SDA = P2 ^ 2; Sbit SCL = P2 ^ 3; Enum eepromtype {AT2401, AT2402, AT2408, AT2416, AT2432, AT2464, AT24128, AT24256. Enum eepromtype enumer; / / DataBuff is the first address to read and write data input/output buffers / / ByteQuantity is the number of bytes to read and write data / / Address for an EEPROM Address / / ControlByte is the control byte for EEPROM, in the form of (1) (0) (0) (1) (0) (A2) (A1) (A0) (R/W), where R/W = 1, / / read operation, R/W = 0 for writing operation, A2, A1, A0 for the page selection or selection of the EEPROM; / / enumer is an enumeration variable, which must be one of the at2401-at24256, respectively, for 24C01 to 24C256; / / ERROR is the maximum number of times that the function aborts if the ERROR occurs after the ERROR occurs / / SDA and SCL by user-defined, temporarily here defined as P2 ^ 2 and P2 ^ 3; / / the rest of the users dont care, just put a subroutine in your program and call it. / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / Void RW24xx (unsigned char * DataBuff, unsigned char ByteQuantity, unsigned int Address, Unsigned char ControlByte, enum eepromtype enumer { Void Delay (unsigned char DelayCount); Void IICStart (void); Void IICStop (void); Bit IICRecAck (void); Void IICNoAck (void); Void IICAck (void); Unsigned char IICReceiveByte (void); Void IICSendByte (unsigned char sendbyte); Unsigned char data j, I; Idata unsigned char page, m_cell_first, m_cell_last. Bit errorflag = 1; If ((64-address % 64) ByteQuantity) { M_cell_first = 64-address % 64; } The else { M_cell_first = ByteQuantity; } M_page = (ByteQuantity - (64-address % 64)) / 64; M_cell_last = (ByteQuantity - (64-address % 64)) I = the ERROR; While (I -) { IICStart (); IICSendByte (ControlByte 0 xfe); If (IICRecAck ()) The continue; If (enumer AT