bios 五大功能详尽介绍(国外英语资料).docVIP

bios 五大功能详尽介绍(国外英语资料) The BIOS five features are detailed. TXT Setup of the IBM notebook computer BIOS IBM laptop into the BIOS is: cold boot (note that not restart the IBM logo to appear on the screen, and the lower left corner prompted information, press the F1 key. After pressing the F1 key, you will enter the BIOS interface a little later. The BIOS interface that IBM USES in its T/A/X/I series is A bit like the standard interface for PhoniexBIOS. The BIOS sets up the main interface of two pieces, the main information below is the main information display, also is the important evidence for the inspection of the goods and water. The meaning of each project is as follows. BIOS Version: shows the current Version of the BIOS. BIOS Date: displays the release time of the BIOS. System-unit serial number (host serial number) : for the IBM notebooks unique serial number, IBMs warranty service is based on this serial number. The original IBM laptop has the serial number in the fuselage, packaging and BIOS. Only these three serial Numbers are identical, which means that the IBM laptop is not passive. System board serial number (serial number) : the unique serial number for each IBM notebook PC. IBM will verify the serial number of the motherboard during the warranty and compare it with the data in the database to determine whether the motherboard is original. CPU Type: the Type of CPU used for the laptop. For example: Pentium III - Intel (R) (R) SpeedStep Technalogy, said that the computer USES is notebook computer dedicated Mobile Pentium Ⅲ CPU. CPU Speed: indicates the CPUs main frequency, and the figure above shows 900MHz. Install memory: the memory capacity that the laptop currently installs. The IBM laptop BIOS Settings interface shows the main menu options. The pre-option triangle arrow indicates that there is a submenu in the back, and when you move the cursor to an option, press Enter to open the next level menu. For example, here are the options: The Config The Da