boot.ini 文件参数详解(国外英语资料).docVIP

boot.ini 文件参数详解(国外英语资料) The Windows nt class operating system, which is Windows nt / 2000 / xp, has a special file, too Its the boot.ini file, which makes it easy to set up multiple boot systems according to our requirements. The boot-ini file will be on the partition of the operating system already installed with Windows nt / 2000 / xp The default is c: \ below. But it has hidden and system properties by default, so you need to set up your folder Items to display the boot.ini file. We can open it with any text editor. In general, it reads as follows: [the boot loader] Timeout = 30 Default = multi (0) disk (0) rdisk (0) partition (1) \ Windows [operating systems] Multi (0) disk (0) rdisk (0) partition (1) \ Windows = Microsoft Windows xp Professional/fastdetect In Windows 2000 or xp, we can easily set up the boot.ini file. It would be Right-click on my computer and select properties to open the system properties dialog and click high Level TAB, click Settings button in start and fail fix and open startup and failure Fix the dialog box, where we can set it in detail. If you have a Windows xp operating system, you can use the system configuration utility to make it easier Edit the boot.ini file. To do this: open the start menu, click run, and play again If you type msconfig in the text box and click ok, the system configuration utility pops up Hit the boot.ini TAB, and you will see the interface shown here. In this case, we can easily set the text A. Now, lets talk about the meaning of the contents of this file. The system load part ([boot loader]) This part is simple, only two Settings. Thats timeout = and default =. Timeout = is the time when the boot time system boot menu displays, which is automatically loaded over the set value The default = specified * system. The default value is 30, and the unit is seconds. We can set the wait in here The length of between. If you set it to 0 then you dont display the system boot menu. Default = is a system that sets the defau