CAD（04 配套CAD笔记）(国外英语资料).docVIP

CAD（04 配套CAD笔记）(国外英语资料) AUTOCAD tutorial -- -- -- -- -- -- -- -- Horse teacher QQ 463719183 Tutorial address / -- -- -- -- -- -- -- -- The toolbar is pulled out Right-click on the other toolbar 1. Plot modification 2. Annotation Cursor control Tool menu bar, options display cross cursor size Select the pick box size Option (left key) Click select (click again to add) The box is selected in the white space - all contain objects from left to right (blue) -from right to left (green) just touching the object 4. Esc to cancel Delete delete (selected object) CTRL + z to undo CTRL + y redo 5. The wheel Double-click to display all the drawings Scroll drawing Press and drag the drawing 6.... Command bar Where all commands appear, actions are prompted by the command line For beginners, look at the command line 7. Orthogonal F8 Horizontal and vertical patterns Object to capture Find the switch that sets the control point for the special point right click Object tracking The rulers action cursor is placed on the point and slowly emerges DYN... 8. To determine the key Space return right Nine straight L Select the command starting point to drag out the input length and click ok Relative coordinates Specify the starting point direct input (X, Y) and click ok The input of the coordinate is (X, Y). -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- A straight line The Angle The Angle is rotating counterclockwise in the positive direction The Angle starts from the horizontal line at the right of the starting point Angle of the input The length value shift + comma () Angle In the length of the position Go straight to the Angle input point (assuming length) Note: after the command is finished, click the confirmation key again to repeat the last co