max灯光技巧(国外英语资料).docVIP

max灯光技巧(国外英语资料) 1, I do not rendering the appearance is light, appearance effect appears louqun building play a parallel light and some auxiliary floodlight is far from enough, the whole scene appears very inflexible, consult everybody have what good method? A: I dont know if you are talking about black sky or daytime. Light is a few, first is the main light source, the light of exterior scene is the sun. But by the lamps of parallel light to simulate more, just useless at a lamp, a lamp that the light was too hard, set the light attenuation of big, make the light is downy, sloping downwards, and reflective of the outside world, also called the sky light, by the spotlights simulation, light Angle is big, obtuse, set the light attenuation of larger, the light is downy. And then there is the reflection, which is simulated by the spotlights, which is lit up from the bottom of the ground, and the light is weaker than the main light source, and sets up a large attenuation. Finally, the light is filled, where the light is too dark, a floodlight is placed, and the light removal function is used to illuminate the darkness. Try using sunlight instead. How is the lifelike effect of the tube lamp in the effect diagram made, the tube light itself is bright, and the light of the lamp illumined by the lamp is so soft? A; You said that the so-called tube should be body light effect, consists of two parts, a light, tube light is actually transferred to the materials self-illumination value is very high, make its appear bright, seems to be the light (not bright light above), (2) in the canister light has always been under the spotlight, the direction and the roof has a certain slope (light on the wall or object), the soft hardness of light tones, the default value is 50 like, sometimes not appropriate. Actually the feeling of light for a tube lamp is false, hey hey! , to be very good to adjust the effect of light distance, if you want to produce light and shadow, with light body, i