专业音响 - C-MARK KTV无线话筒的使用技巧(国外英语资料).docVIP

专业音响 - C-MARK KTV无线话筒的使用技巧(国外英语资料) The use of KTV wireless microphone 2009-316: Qingdao xin and electronic engineering co., LTD. 38 With the popularization and widespread use of wireless microphones, how to better use their superior function, the following question should be paid attention to in operation and usage: A, how to choose and buy the wireless microphone emission pattern of the battery In order to ensure the system normal use will not appear when signal distortion and frequency interference, must use the way of battery is enough, when the choose and buy youd better choose 9 v alkaline battery condition. Second, how can you know as soon as possible transmitter battery power is enough In a variety of brands and models of wireless microphone systems, most of the receiver does not have the transmitter battery power display function. Although there are low battery pressure on some wireless transmitters, users are less likely to notice the problem in use. In the normal use of the wireless microphone, the occurrence of a battery shortage can cause an audio signal distortion or frequency interference. To prevent this kind of phenomenon, the operator can be in the normal use of wireless microphones, timely use mixer PFL (persistent functional language) function of pre-listening, use headphones wireless microphone signal, if the voice clarity is slightly reduce or noise increases slightly, you should replace the battery right now, as much as possible so as to avoid because of a shortage of battery power for the operator to bring the psychological pressure. Three, how to change the battery during the performance to replace the battery during the performance should be convenient, quick, simple. Is the best way to open the mixer channel retuned switch, retuned to make wireless microphone, such as the mixer of the without this feature can be wireless microphone receiver output volume of close to death, and then turn off the transmitter power, replace the battery after