手机上网大全(国外英语资料).doc

手机上网大全(国外英语资料) Mobile GPRS Settings are as follows: enter the data communications - account - add account -- GPRS data input: CMCC GPRS APN: cm wap dont have to fill out the above user id and password configured phone set is just like our desktops MODEM, followed by dialing set of laptop, because it is mainly about wireless connection, it is still the same, no bluetooth is replaced with a headphone cables for two machine interconnection. Then the final key, the dial number is * 99 * * 1 #, and the user name and password are empty. Also remember that the bluetooth connection of the property bar in IE enabled the proxy server, which is the gateway of CMNET for China mobile, 10.0.172, port 80. Ha ha, MODEM driver mobile phones drive refers to do, to be loaded on the computer, so mobile phone through the cable/infrared/bluetooth MODEM open computer can recognize it ~ is a MODEM. You dont have to choose anything, just go to the mobile home page and download a dipper. Name is China mobile with E line client /download/setupV2.0.2.rar this software installed on the computer on after add GPRS INTERNET Settings, select your phone then add call words, have to do is fill in the access point (when the phone must have open on the function of MODEM connected to the computer) call number is * 99 #, but there are two kinds of access points, one is CMNET, it is directly connected to the INTERNET, the other is CMWAP, is connected to the mobile WAP network. The difference between the two is that 1, CMNET is connected directly to the INTERNET, charging for every K / 3 cents, if you have a $10 GRPS changyou package, there is a 6M traffic to you, over the part per K / 1 minute. Or maybe 100 pieces of 200, 200 pieces of water. But the total return is too expensive, the last half of the time the net is two or three. The speed is a little bit faster than using a telephone line. 2, CMWAP access because of the mobile phone WAP network is connected, so you can directly see the INTERNET is not p