柱塞泵故障分析与排除(国外英语资料).docVIP

柱塞泵故障分析与排除(国外英语资料) Product name product description All categories: KAWASAKI (KAWASAKI) plunger pump and hydraulic motor series KOMATSU excavator (KOMATSU) with a plunger pump and motor series HITACHI (HITACHI) series excavator hydraulic plunger pump used to bielefeld carter (CATERPILLAR) series excavator hydraulic plunger pump used REXROTH REXROTH hydraulic pump and hydraulic motor sauer-danfoss (SAUER DANFOSS) series helwig (VICKERS) series NACHI series (NACHI) series VOLVO (VOLVO) series (KAYABA) series LINDE (LINDE) series teijin (TAIJIN) series hydraulic motor TOSHIBA (TOSHIBA) rotary motor series GEAR pump (GEAR PUMP) series of series of extreme east PUMP series valves other EATON (EATON) series of hydraulic pressure balance type, mud and water shield machine All the class The KAWASAKI plunger pump and hydraulic motor series KOMATSU excavators use plunger pumps and motor series HITACHI excavators use hydraulic plunger pumps CATERPILLAR excavators use hydraulic plunger pumps REXROTH hydraulic pump and hydraulic motor SAUER DANFOSS series VICKERS series NACHI series VOLVO series (KAYABA) series LINDE series TAIJIN series hydraulic motor TOSHIBAs rotary motor series GEAR PUMP series Extremely east pump series Valve type Other classes EATON series hydraulic pump fittings Ishikawa island series Earth pressure balance type, mud and water shield machine Failure analysis and exclusion of hydraulic plunger pump The failure analysis and exclusion of hydraulic plunger pump are not sufficient or no oil in the output flow Suction resistance is big, such as fuel tank oil level is too low, oil suction filter clogging the suction pipe is too long and bend too much wait for a reason, cause the oil absorption channel along the pipeline pressure loss and local pressure and make the output flow rate is insufficient, can be made according to the situation. 2. Suction pipe line bare pipe fittings is not tighten or seal in the atmosphere, air intake, it is difficult to form the nece