国内齿轮研究现状及问题研究.PDFVIP

网络出版时间：2013-08-13 13:57 网络出版地址：/kcms/detail/11.2187.TH1357.034.html 国内齿轮研究现状及问题研究* 赵 韩 吴其林 黄 康 邱明明 刘 鹏 (合肥工业大学汽车技术及装备国家地方联合工程研究中心 合肥 230009) 摘要：简要回顾齿轮传动的历史和齿轮行业的发展。较系统地介绍了近年来齿轮技术新的发展和应用现状。着重阐述齿轮的 齿形与结构、新理论在齿轮研究中的应用和计算机软件开发与应用三个方面的研究情况。齿轮的齿形与结构重点涉及齿轮的 齿形齿廓、齿轮的性能指标、齿形修正和齿轮传动结构等四个方面；齿轮研究的新理论应用主要介绍了分形理论、弹流理论 等目前结合应用较多的方向；计算机开发和应用方面则从计算机辅助设计、分析、检测与制造工艺等角度梳理了国内应用和 发展的情况。提出了齿轮研究的发展需解决标准及检测问题、新理论应用研究的成果需解决推广和知识固化问题、计算机软 件的应用需解决通用化和知识挖掘问题等解决思路。 关键词：齿轮 齿形 齿轮传动结构 理论 软件开发应用 中图分类号：TH132 STATUS AND PROBLEM RESEARCH ON GEAR STUDY ZHAO Han WU Qilin HUANG Kang QIU Mingming LIU Peng (Local and National Engineering Research Center of Automotive Technology and Equipment, Hefei University of Technology, Hefei 230009) Abstract ：The history of the gear drive and development of the gear industry is brief reviewed. The development and application status of gear technology is more systematically introduced in recent years,focuses on three study aspects of gear tooth figure and transmission structure,application of some new theories, and development and application of computer software. Gear tooth profile, performance, tooth correction and transmission structure are researched in the part of gear tooth figure. The current combine d application such as fractal theory and elastic fluid theory is mainly introduced. Computer research of gear develops rapidly and application and development of the domestic situation is briefly combed from computer-aided design,analysis,testing and manufacturing processes perspective.Standards and testing issues need to be addressed in the gear research, knowledge to solidify and