热电偶的功效(国外英语资料).docVIP

热电偶的功效(国外英语资料) thermocouple The editor Thermocouple (thermocouple) is commonly used in temperature measuring instrument of temperature measuring element, and it is directly measured temperature, and the temperature signals into a thermoelectric emfs, through electric instrument (secondary instrument) is transformed into the temperature of the measured medium. The appearance of all kinds of thermocouple is often due to the need to vary, but their basic structure is roughly same, usually by the hot electrode, insulation sleeve to protect the main parts such as pipe and connection box, and usually display meter, recording meter and electronic regulator. [activity] hello, earth! Orders to record Introduction to the basic 2 temperature conditions Three main characteristics 4 structure requirements Working principle of the five 6 common variety 7 installation Eight measurements 9 major categories 10 installation requirements The correct use of 11 12 troubleshooting 13 temperature compensation 14 main advantages 15 selection method Introduction to the basic The basic principle of thermocouple temperature is that two different components of a material conductor make up a closed loop, Thermocouple (figure 1) When the temperature gradient is at both ends, the loop will have an electric current passes through, the existed between the electromotive force on both ends - thermoelectric emfs, this is the so-called Seebeck effect (Seebeck effect). Two different components of homogeneous conductor electrode as heat, the temperature is higher for work at the end of the end, one end of the low temperature as the free end, usually free end under a constant temperature. According to the function of thermoelectric electromotive force and temperature, the thermocouple meter is made. Indexing table is free end temperature at 0 ℃, under the condition of different thermocouples with different indexing table. thermocouple Access in the thermocouple loop when the third metal material, the two