电脑启动设定(国外英语资料).docVIP

电脑启动设定(国外英语资料) The BIOS serves as a bridge between the hardware and the operating system, which allows you to set the systems operating mode and hardware related parameters. Department of When the system is switched on, the BIOS will start the self-test (POST) first. At this point, press the Del key to enter the BIOS to set the main image It is. Here we will make some instructions on how the BIOS functions and how it works. Its function and operation instructions are as follows: Standard CMOS Setup system basic parameter setting This option functions mainly to set the systems basic parameters. The user selects the project to set, using Pageup and Page The down key changes the content. In each of the options, you can button to display the contents of that option. The Date (Date) Set current date. The scope is: The Month (months) : 1 to 12 Day (days) : 1 to 31 Year (Year) : 2079 Time (Time) Set current time. The scope is: When the Hour () : 00 to 23 Minu7te (points) : 00 to 59 The Second (in seconds) : 00 to 59 HardDisks (hard disk) This option is used to set up all the IDE drives in the system (PrimaryMaster/Slave; SecondaryMaster/Slave) Type. The instructions are as follows: Auto: allows the system to automatically detect the type of hard disk and set it when it is switched on. None: no hard drive. User: allows users to set their own hard drive parameters. Including CYLS, HEAD, PRECOMP, LANDZ. In hard All the instructions on the disc machine have the head count and so on. [special note] : the BIOS does not support SCSI hard drive Settings. There are three options for MODE: NORMAL mode: for traditional standard mode, the capacity of the hard drive is 528MB. LBA (LogicalBlockAddressingMode) pattern: applies to the hard disk capacity and supports the logical block LARGE Mode: this option is available when the hard disk or operating system does not support the LBA mode when the hard disk capacity exceeds 528MB. DriverA/DriverB (None) This option sets the floppy disk typ