详细教程(任何人都必看)(国外英语资料).docVIP

详细教程(任何人都必看)(国外英语资料) 1 unlock, Turn on the phone or turn off the phone when it is switched on, and hold the volume button immediately until the three colors are released. The image will display the SPL version, if it is SPL - 1.42. If the suffix is not oliNex (0001 or something), its not a brush. Note: if not, dont start the machine! If your computer system is XP, install ACTIVESYNC4.5. If your computer system is VISTA or Windows 7, install the WINDOS MOBILE device center. C checks to see if there is a NBH file on the phones memory card, which cant be unlocked properly and is quite similar to the rebrush ROM D synchronous mobile phone, click unlock software HSPL, click NEXT, and dont touch the phone, the phone will automatically black screen, and into the three color, then computer unlock software will be to read the article (dont use HSPL2 unlock, with older versions of HSPL unlock). When the phones screen displays the smiley face of the HACKED IT, ITs a success! After the E is unlocked, wed better manually enter the three-color screen to see if its a perfect success. (entering a three-color screen: press down the volume to press down under the power of the power switch, and the spl-1.42 HSPL appears to be successful. F then normal boot, synchronize with computer, and click HSPL2 unlock upgrades, step up, dont touch the phone, then select unlock computer version, the drop-down menu to 2.08, click NEXT, continue to unlock, unlock completed into 3 color, check to see if the unlock was 2.08 HSPL! G unlocking, upgrade success! /thread-31857-1-1.html (details unlock) 2 brush official ROM, restore character (for frequent flash after, the problem of word stock is damaged As you know, after much HD2 brush machine will cause the machine is very unstable. The specific situation is the machine will cause crash, restart or stuck on the HTC logo will not move, or hard up automatically, could not be addressed by brush ROM (OS). I met such a problem. A few days ago also post for