904-初三物理(外国英语资料).doc

904-初三物理 Junior Physics In 2006, we reviewed sixth units, simple mechanical work and energy [teaching content and purpose] 1. Understand the concept of the arm of the arm. 2. Understand the balance of leverage 3. Understand the function of fixed pulley, moving pulley and pulley block. 4. Common sense to understand the function of wheel and axle 5. Understand the two necessary factors of doing work. 6. Understand the formula of mechanical work: W=FS 7. Understand the concept of power 8. The principle of knowing work 9, know how to study hard and work, know mechanical efficiency 10, understand the preliminary concept of kinetic energy and potential energy, know the elastic potential energy, and know that kinetic energy and potential energy can be transformed mutually [key and difficult] 1. Understand the concept of the arm of the arm, draw the arm of an arm correctly on the map, or judge by the condition given by the title, which is the arm of the arm. 2, the balance of leverage conditions and Applications 3. The function of fixed pulley, moving pulley and pulley block 4, the concept of work, power 5, the principle of work 6, mechanical efficiency - know hard, extra power, total power and mechanical efficiency 7, the concept of kinetic energy, potential energy and the concept of mechanical energy 8, kinetic energy and potential energy can be transformed into each other. [methods and materials] 1. What is leverage? Physics is a definition of the lever to rotate around a fixed point in force under the rod. The so-called strong, is required in the use of rods can not be deformed, as rod shape is not necessarily straight, such as pulleys and shafts etc. can be regarded as a lever. In the production of labor and daily life, often exposed to leverage, such as food use steelyard, used in the laboratory scale. Commonly used scissors, tweezers, claw hammer, etc., are actually the deformation of the lever. 2. Correctly understand the concept of the arm of force The arm is the d