卫浴洁具安装及注意事项(外国英语资料).docVIP

卫浴洁具安装及注意事项 (1) construction process flow; Insert wall tile, ceiling, floor tile, install stool, washbasin, bath tub, install and connect water supply and drainage pipe. Install lamp, socket, mirror, install towel bar and other hardware fittings. 1. the process of toilet Check the floor drain pipe, nozzle, flat is to draw a good mark to play, with putty, hole set rubber pad, screw nut, and the water tank on the back of the two side hole punching, painting mark, insert bolt and twist firmly to hang back water tank, water tank is looking for flat back nut to install the screw on the elbow, installed water Bazimen to Niang lamp fork curved float, insert door and Bazimen to tighten the nut. 2. washbasin process The expansion bolt is inserted and twisted firmly. The basin pipe rack is hung well. The basin is placed on the rack to be level and to be connected with the water. 3. bath tub process flow The tub, water installation, installation, installation, water tight sealing putty leveling and alignment test 4. shower bath process Cold and hot water pipe with smooth tube, a short amount for size, with a shower of copper intake with oil lead to the nozzle, and wrapped to tighten the nut, fixed on the wall, the upper tube installed in the three opening, wood screws fixed on the wall. Process 5. bidet Hot and cold mixed switch, the Watergate door cover and nut, square, installed the Watergate doors installed, and turn the core nozzle nut to export the Watergate hybrid switch on the nut, installed three gate door cover to magnetic basin installed to install the nozzle to install to install portable nozzle rod to adjust the positioning. (two) construction essentials 1. washing basin installation construction essentials: (1) wash basin products should be smooth and non destructive. The drain plug shall have an overflow hole not less than 8mm in diameter. (2) the drain cock and the wash basin shall make the connection, the drain bolt and overflow hole aim at the overflow hole o