混凝土外观缺陷及控制(外国英语资料).docVIP

混凝土外观缺陷及控制(国外英语资料) This article is contributed by popondd Pdf documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. #$%! (*++ (0%12), -./ (3) 1 Building gypsum and cementitious material Concrete appearance defects and control of concrete appearance defects and control Wu Yaming, Yao Zhanghu (Jiangsu Traffic Engineering Co., Ltd., Jiangsu, Suzhou) ) ... Abstract: with the appearance of the quality of the concrete requirements of the project more and more high, the construction units will be as an excellent project to achieve an important link. This paper introduces the appearance of common appearance defects in concrete construction, analyzes the main factors of appearance defects, and puts forward preventive measures and solutions. Keywords 3 appearance quality; concrete defects; classification of defects in the modification of: 45) 6 document code: 7 article number: #8.). () %).. * #)...... 9#.) With the development of economy and the renewal of peoples concept, the appearance quality of concrete engineering is getting higher and higher. Each construction unit also takes the concrete appearance quality as the establishment project image, creates an excellent project the important link to grasp. This paper introduces the concrete mixing of small structures, Nanjing Hangzhou high-speed! #$% standard concrete appearance of bridge engineering, defect prone locations, and preventive measures. The fall should meet the construction requirements. (concrete) mixing in the mixer and then discharging, to avoid the delivery of concrete segregation during casting. The separated concrete shall be uniformly mixed and then put into the mould. When the vertical height of the cast member is too high, string casting shall be adopted. The bottom of the serial tube is less than the pouring concrete surface) (the material and vibration should be made at any time, and the material should be vi