第五部分 机电运输 多选(外国英文资料).docVIP

第五部分 机电运输 多选(国外英文资料) Third, multiple choice The coal mine safety regulations stipulate that the coal mining machine must (AC) when it stops working or repairing. A. switch off the power B Open the clutch for the clutch The following statement is correct (BC) when there is a hard clamping or pyrite concretion in the working face. A. it can be cut off B The coal mining machine is strictly prohibited (ABCD) must be done when the coal cutter changes the cutting teeth and the drum. A guard B cuts off the power supply C opens the isolation switch and the clutch D to lock the working face conveyor The following is the correct description of the coal mine spray device (AB) When the spray device is damaged, the B must be installed in and out of the device The spray pressure of the C spray is optional If the spray device is not spray, the external spray pressure must not be less than 2MPa (BC) before the coal (rock) is applied to the coal (rock) machine. A power failure B is sprinkling the gangue or coal C flush the top help D to fill the coal seam In the use of raking, the rules must be observed (ABCD) A must have A lighting B to anchor the fuselage and the stern wheel C must suspend the sensor D brake device of the methanometer which must be complete and reliable Before moving the machine, it is necessary to do the following requirements (BCD) to start the driving machine. A, theres A special someone whos going to have to send out an alert C and theres no one in front of the D cut arm The machine must do (ABC) when it stops working and repairing and crossing the line. A will cut the machine head to the ground B and disconnect the engine power switch C disconnects the magnetic initiators isolation switch D to alert The requirement (ABD) that must be satisfied when using raking machine at tilting. A, there must be measures to prevent the fuselage from falling When the Angle of B is greater than 200, the driver must be in front of the guard column or stop. C. strictly prohibit