cad打印(国外英文资料).docVIP

cad打印(国外英文资料) CAD print.Txt First, solve the CAD printing problem. The first step is to enter the file print. Select in the pop-up Print dialog box. The second step is to select the print device. In the printer configuration, select the printer that you can connect to, and define the width of the line to be printed in each color line of the CAD diagram to be printed in the print style sheet. Ill write again later on how to define the print style. Print range, select the current tab, print number, according to your own requirements to fill in. The third step is to print settings. In the drawing size and drawing unit and select drawing size into the size of the paper much needed to print, for example in the A3 printer A3 file, select A3 ; the printable area general default is mm. You can choose vertical or horizontal in graphics direction, and then compare the difference from the full preview in the lower left corner to see how to choose. The print area select window, the dialog box disappears, return to the CAD interface, then use the mouse on the screen to select the print area, usually in the upper left corner, click the left mouse button in the lower right corner, then click the left mouse button, then choose the right, after the print dialog again there, the print area choice. At the print scale, you can choose zoom in space according to the drawing space, and print offset where you can choose center print. The fourth step, after completing the above content, to preview the print content, select the print dialog box in the lower left corner of the full preview, you can see. What you see is consistent with what is printed. If the content is not expected, the choice of the print area window and the choice of direction, direction, and direction are still a bit of a problem and need to be adjusted. In the fifth step, if the full preview is what you want, click the OK button in the lower right corner of the dialog box. When you print it, you can get the finished prod