js数组的操作(国外英文资料).doc

js数组的操作(国外英文资料) 1, the creation of arrays Var arrayObj = new (Array); / / create an array Var arrayObj = new Array ([size]); / / create an array and a specified length, not limit length Var arrayObj = new Array ([element0[, element1[,... [, elementN]]]]); creates an array and evaluates That is, although the second methods to create an array of the specified length, but in all cases the array are variable length, even if the specified length is 5, still can be stored in the specified element length attention outside, then the length will change. 2, access to elements of an array Var testGetArrValue=arrayObj[1]; / / get the array element value ArrayObj[1]= this is the new value; / / assign a new value to the array elements 3, add array elements ArrayObj. push ([item1. [itemN. [item2 [.; / / for) one or more new elements are added to the end of the array, the array of new length ArrayObj.unshift ([item1. [item2. [itemN for [.); / / one or more new elements are added to the array, the array elements automatically after the shift, returns an array of new length ArrayObj.splice (insertPos, 0, [item1[, item2[,.. [, itemN]]]]); / / insert one or more elements to the specified position of the array, the inserted position of the elements automatically after the shift, return. 4, the deletion of array elements (arrayObj.pop); / / remove the last element and returns the element value (arrayObj.shift); / / remove the previous element and returns the element value, automatically moves the elements in the array ArrayObj.splice (deletePos, deleteCount); / / delete from the specified location deletePos specifies the number of elements of deleteCount, returns the removed elements of an array 5, the array of interception and merger ArrayObj.slice (start, [end]); / / returns a part of the array in array form, pay attention to end does not include the corresponding element, if omitted end will copy all the elements of start ArrayObj.concat ([item1[, item2[,.. [, itemN]]]]); / / multiple