城市燃气门站流量计与调压阀参数相互匹配的解决措施_王孟德.pdfVIP

2015 4 34 4 1000-8241 2015 04-0447-04 450000 1 1 1 1/3 5 19 TE978 A doi 10.6047/j.issn.1000-8241.2015.04.023 Solutions to match the parameters between fl owmeter and pressure control valve at city gas gate station WANG Mengde, JIANG Xin Henan Branch, PetroChina KunLun Gas Company, Zhengzhou, Henan, 450000 Abstract: Flowmeter and pressure control valve play an important role in the distribution system of gate station in a city. However, their working ranges are different, leading to inconsistency of the best working sensitivity interval. In this case, the flowmeter or pressure control valve may be damaged. In this paper, through the analysis on working principles of the fl owmeter and pressure control valve, the reasons why the devices do not match are identifi ed. Two solutions are put forward: (1) the line number of pressure regulation is added and the rated working fl ow rate of each pressure control valve is lowered; and (2) on the basis of original confi guration with 1 in service and 1 standby, additional one line for pressure regulation with small fl ow rate is provided, which is 1/3 of the rated fl owrate, so as to achieve switch of pressure control valve at different fl ow rates. In this way, the fl owmeter and pressure control valve can both work within the best working interval to reduce the probability of equipment damage. (5 Figures, 1 Table, 9 References) Key words: city gas, gate station, pressure control valve, fl owmeter, system, parameter