金手指板外观要求.pdfVIP

1.Purpose To specify the characteristics and quality requisites of the modules main raw material, the Printed Circuit Board, in order to assure the quality of the released product and to stabilize the quality of the production line by thoroughly controlling the materials 2.Scope SITE Kiheung, Onyang LINE Onyang Module Line Vendors Dae Duck Electronics, Sim Tech, K.C.C. (Korea Circuit), Samsung Electric(MLB), Dae Heung Exchage (AICA), Dong Woo Commerce (IBIDEN) Digix (TRIPOD), LG Electronics, Keumjung Intra(BOARDTEK) Keumjung Intra(UNICAP), IST(VIASYSTEMS), KJC(MULTEK), Dae duck GDS Subcontractor Han Yang Engring Co., Woo Ik Electronics, Wetech, D-gate 3. Relevant Specs Spec No. Spec Title - PCB Module Drawing Spec - Printed Circuit Board Drawing Spec Green Procurement Management Procedure 4. Applied Forms N/A 5. Definitions FOOT PRINT Pad designed at the same interval as the SMC component lead on the surface of the Printed Circuit Board Printed Circuit Board The connection of individual components on a circuit by fixing various components made of Cu to be able to operate as stipulated Printed Circuit Board (PCB) Arrangement The arrangement on the PCB for the improvement of construction by various arrangements of one Module PCB Tab or Contact Finger The passage that connects the electric signal of the system to be applied for the Modules circuit and the Module Foreign materials (Glass epoxy dust, PSR, Dry film, Vinyl, Tape adhesive, etc ) Foreign materials with a thickness on the Ta