改性脲醛树脂合成工艺与胶合性能的关系_韩书广.pdfVIP

2009, 29( 4) : 380- 384 29 4 JournalofFujian College ofForestry 2009 10 改性脲醛树脂合成工艺与胶合性能的关系 , , , (南京林业大学木材工业学院, 江苏 南京 210037) : , ()( ) , , , ; , , : ; ; ; : TQ433 : A : 1001- 389X( 2009) 04- 0380- 05 R elation sh ip betw een syntheticp ro cess and glu ing prop erty of m od ified UF res in HAN Shu-guang, HUAN Run-zhou, WU Yu-fe,i LU X iao-ning ( College ofW ood Science and Technology, Nanjing Forestry University, N anjing, Jiangsu 210037, China) A bstrac t: The expermi ent arranged by central composite design, as the results of the statistical analysis, the finalmolar ratio, quantity ofmelam ine, quantity of polyvinylalcohol and cloud point temperature had effecton the bonding strength, prepress bonding strength and formaldehyde em ission ofmodified UF resin. The results also showed that the regression equation of bonding strength, prepress bonding strength and formaldehyde em ission were significant and fitting, could describe them perfectly. According to the test of regression coefficient, the most significant factor effect on bonding strength, prepress bonding strength and formaldehyde em issionwas finalmolar ratio, bonding strength, prepress bonding strength and formaldehyde emission enlargement followed final molar ratio increase, themore quantity ofmelam inemade the larger bonding strength and the lower formaldehyde emission, but no advantaged to prepress bonding strength. A long with the increase ofquantity of polyviny,l prepressbonding strength augmented too, but no influence to formaldehyde em ission. K ey w ord s: quadratic orthogonal rotational combination design; modifiedUF resin; gluing property; formaldehyde em ission ,, , ) ) ) [ 1- 2] ,