section 22 11 24 – municipal pacakged pump .doc

SECTION 22 11 24 – MUNICIPAL PACKAGED PUMP SYSTEMS PART 1 - GENERAL 2 1.01 WORK INCLUDED 2 1.02 RELATED SECTIONS 2 1.03 MANUFACTURER 2 1.04 QUALITY ASSURANCE / REFERANCE STANDARDS 3 1.05 WARRANTY 4 PART 2 - PRODUCTS 5 2.01 PERFORMANCE AND DESIGN REQUIREMENTS 5 2.02 MECHANICAL 5 2.03 PUMPS AND MOTORS 13 2.04 OPTIONAL SKID UPGRADES 20 2.05 ELECTRICAL 22 2.06 SEQUENCE OF OPERATION 28 2.07 EQUIPMENT ENCLOSURE UPGRADE 29 2.08 MODULAR STRUCTURE ENCLOSURE OPTIONS 47 PART 3 - EXECUTION 52 3.01 INSTALLATION, STARTUP CUSTOMER TRAINING 52 ATTACHMENT A – TECHNICAL DATA SHEET 55 SECTION 22 11 24 – MUNICIPAL PACKAGED PUMP SYSTEMS - GENERAL WORK INCLUDED This Section covers work by the Contractor to furnish, install, test and make ready for operation a Booster Pumping system. The equipment furnished includes pumps, motors, pump controls, manifolds, piping, valves, gauges, electric controls, and all related appurtenances, including skid, to complete a booster pumping system. Pump system manufacturer shall provide a UL listed, single source responsibility for the manufacture, warranty, service and operation of a prefabricated, skid-mounted, fully automatic pumping system. The pumping system shall conform to the following specifications in all respects. This specification covers the minimum requirements; however, it should not be construed as all inclusive. It is the manufacturer’s responsibility to include all necessary appurtenances to provide for a complete, fully automatic and reliable pumping system. The manufacturer shall supply a complete set of general arrangement drawings, electrical power schematics, and control schematics in the Installation, Operation Maintenance Manual. RELATED SECTIONS (Insert Related Spec Section List Here) MANUFACTURER The pumping system shall be of the type manufactured by Metron, Inc. Denver, Colorado, U.S.A., (303) 592-1903, or pre-approved equal, approved by the engineer prior to the bid opening. For consideration of a proposed equal syst