C51单片机模块化编程万年历设计.docVIP

C51单片机模块化编程万年历设计 程序如下：main.h #ifndef __MAIN_H__#define __MAIN_H__ #includeregx52.h#includeintrins.h#includeabsacc.h#define uchar unsigned char#define uint unsigned int#define DQ P3_7#endif ds18b20.h #include main.huint sec;uint min=41;uint hour=18;uint day=20;uint month=4;uint yearl=11;uint yearh=20;uint tcnt;uint cursor=0;uchar a=0xff;uchar code Seg[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; void delay(uint t){??? uint i;??? while(t--)??? {for (i=0;i125;i++);}}void Tdelay(unsigned int i){?while(i--);}void Kdelay(unsigned int z){??? uchar i,j;??? for(i=0;iz;i++)??? for(j=248;j0;j--);}Init_DS18B20(void){?unsigned char x = 0;?DQ = 1;????Tdelay(200);??DQ=0;????Tdelay(80);?DQ=1;????Tdelay(200);?Tdelay(200);}//读一个字节ReadOneChar(void){unsigned char i=0;unsigned char dat = 0;for (i=8;i0;i--)?{? DQ = 0;? dat=1;? DQ = 1;? if(DQ)?? dat|=0x80;? Tdelay(4);?}?return(dat);} //写一个字节WriteOneChar(unsigned char dat){?unsigned char i=0;?for (i=8; i0; i--)?{? DQ = 0;? DQ = dat0x01;? Tdelay(5);? DQ = 1;? dat=1;?}} //读取温度ReadTemperature(void){unsigned char a=0;unsigned char b=0;unsigned int t=0;float tt=0;Init_DS18B20();WriteOneChar(0xCC);WriteOneChar(0x44);Init_DS18B20();WriteOneChar(0xCC);WriteOneChar(0xBE);a=ReadOneChar();b=ReadOneChar();t=b;t=8;t=t|a;tt=t*0.0625;???????t= tt*10+0.5;?????return(t);} void display(uchar L1,uchar L2,uchar L3,uchar L4,uchar L5,uchar L6,uchar L7,uchar L8,uchar L9,uchar L10,uchar L11,uchar L12,uchar L13,uchar L14,uchar L15,uchar L16){??? P2=0x7F;P0=L1;delay(1);? //yearh??? P2=0xBF;P0=L2;delay(1);? //yearh??? if(cursor==6){P2=0xDF;P0=L3;delay(1);}else{P2=0xDF;P0=L3;delay(1);}?? //yearl??? if(cursor==6){P2=0xEF;P0=L4;delay(1);}else{P2=0xEF;P0=L4;delay(1);}?? //yearl??? if(cursor==5){P2=0xF7;P0=L5;delay(1);}else{P2=0xF7;P0=L5;delay(1);}?? //month??? if(cursor==5){P2=0xFB;P0=L6;delay(1);}else{P2=0xFB;P0=L6;delay(1);}?? //month??? if(cursor==4){P2=