SF6 气体示踪法测定低透气性高瓦斯煤层瓦斯抽放半径 - 《煤田地质与 .PDF

第43 卷 第3 期 煤田地质与勘探 Vol. 43 No.3 2015 年6 月 COAL GEOLOGY EXPLORATION Jun. 2015 文章编号: 1001-1986(2015)03-0122-03 SF 气体示踪法测定低透气性高瓦斯煤层瓦斯抽放半径 6 郑 雷 (乌海职业技术学院，内蒙古 乌海 016000) : 针对目前应用较多的瓦斯抽放半径测定方法——相对瓦斯压力测定法与实际情况偏差较大 问题，以神华乌海能源公司平沟煤矿 16 号低透气性高瓦斯煤层为研究对象，在井下 1606 工作面 施工瓦斯抽放试验钻孔，采用 SF6 气体示踪法测定工作面瓦斯的抽放半径，并比较了不同抽放半 径的瓦斯抽放效果。实测结果表明，SF6 气体示踪法所测定的瓦斯抽放半径使瓦斯抽采效率显著提 高，该方法为煤层预抽瓦斯钻孔间距的设计提供了依据，可以在低透气性高瓦斯煤层的瓦斯抽放半 径测定中推广使用。 ：抽放半径测定；气体示踪法；瓦斯抽采 ：P618 ：A DOI: 10.3969/j.issn.1001-1986.2015.03.026 Determination of the gas drainage radius of low permeability and high gas coal seam by SF6 gas tracer ZHENG Lei (Wuhai Vocational and Technical College, Wuhai 016000, China) Abstract: Aiming at the problem that the relative gas pressure determination can not accurate determine the gas drainage radius, this paper takes the 16# coal seam in Pinggou coal mine of Wuhai Shenhua Energy Company as the research object.16# coal seam is of low permeability and high gas content. Boreholes for gas drainage test were drilled in the working face 1606, and SF6 gas tracer method was used to determine the gas drainage radius, Then the drainage effect of different radius in field test was compaired. The test results showed that the gas drainage radius tested from SF6 gas tracer method can obviously improve the extraction efficiency.This method provided a basis for the design of gas drainage borehole spacing for the coal seam, and can be used to determine gas drainage radius in the coal seam of low permeability and high gas content. Key words: drainage radius determine; gas tracer method; gas drainage 16